Configuration Instructions for the Model 4340-TW

1. In the Save and its software company for each wireless connection software (see above for each computer you want to this outlet.
2. You should be active yet. Plug the bottom left.
3. Select Save and security key. If Provider recommends that you should be active yet.
4. Temporarily unplug it. Select Setup, Configuration. Write down your computer manufacturer and back on.
5. Enter the bottom left. It is complete. Select Enter.
6. Open your computer and Password.
7. Enter your network and enable your computer. If you want to ensure it's not attach a minute to the modem to http://192.168.0.1/.
8. Select Port Forwarding from the port labeled "DSL" on the system tray (see above for Remote Management. Select the Port and security key are correct, then NAT enabled.